0161 943 0068 - 07426 024161


Tel white large wp48cf1c3a_06 united_kingdom_flag_map1





This is the term given for the inside or the wardrobes (IE hanging rails, shelves, draws, shoe racks) these are usually designed with the customers to create a space specifically for their needs. these consist of robe dividers (uprights) bottom shelf ,robe backs, and sides and top shelves. These are constructed using 15mm – 18 mm mfc board and 6mm – 9mm for backs. the bottom and backs can be excluded from this to help cut cost (depending on the overall condition of installation area)






This is a variation on traditional interiors with its aluminium uprights and move able shelves system this allows customer to change the position of internals to meet there ever changing demands




The standard height for the internals are between 2100mm-2250mm to top shelve this is dependent on customers’ needs IE ( double hanging etc )the space above will be dependent on the ceiling height and will vary  accordingly.




The finished widths of the robes are between 610mm-650mm. all intention will be to keep to the minimum. Unfortunately on some variation (sloping doors, corner units) unfortunately this is not always possible to achieve. And will be determined on installation.




This is the term given to the area surrounding the sliding door system this consist of two vertical battens. A top and bottom batten (these carry the top and bottom running tracks) these are 90mm mfc battens and are used to form an independent perimeter to maintain a square aperture. on some occasions it may be necessary to use L shaped corners as vertical battens  (walls being out of plumb, radiators, coving, etc) this will be assessed on a site visit .

Choose from an extensive range of interior accessories to customise your sliding door storage system and efficiently optimise your space. From shelf units to hanging rails, from drawer units to tie racks, we’ve thought of everything, so you don’t have to.